How do I install the mesh tape?

May 2 2022

Apply a continuous ½” bead of joint sealant into the corner seam of the shower pan where it meets the curb or wallboard. Use the corner pu­y knife to smooth out the sealant so that there is at least 1″ of sealant on either side of the seams. Press 2″ mesh tape (supplied) into the seam, pressing it into the existing joint sealant. Use a sharp utility knife to make small slits to fit the corners. Use a corner pu­y knife to smooth the mesh tape into the joint sealant. Apply a continuous ½” bead of joint sealant on top of the mesh tape and smooth out again with the corner pu­y knife to fully cover the mesh tape. Instructions can also be found in our Pan Installation Guide found on our website.

Share This Article

Choose Your Platform: